UPVC Door Lock Replacement
UPVC doors are an excellent protection against burglaries. However they have a few limitations that can be fixed by installing a deadlock.
It's time to replace the barrel lock if you feel that your uPVC door lock feels a bit loose. This simple DIY project can increase the security of your home and boost its appearance.
Take off the lock cylinder that was in the old lock.
You could have a damaged lock-cylinder when you notice that your front door feels fragile or the lock is struggling to turn. Replacing it will ensure a smooth operation and increase security. The procedure is quite simple and should take around 30 minutes. You'll need a screwdriver. To start by opening your door, examine the edges near the lock cylinder. There is an screw that is in line with the bottom part of the cylinder. Remove it with a screwdriver, and put it away in a safe location.
You'll have to know the dimensions of your current cylinder so you can find an appropriate replacement. The sizes typically range from 60mm up to 110mm. To determine the exact size, you'll need to locate the screw on the faceplate of the lock and remove it. You can also rotate the handle of the lock using the key while the cylinder is still in place to observe how much it shifts in each position.
The next step is to determine the cylinder's diameter and the length of the cylinder cam. These measurements will help ensure that your new lock fits the door you have. These dimensions can vary depending on the type of uPVC. You'll need to choose an alternative that is the same or slightly bigger than the existing cylinder.
Once you have your measurements, it's time to take down the old door cylinder. It's not difficult, but you must do it correctly to avoid damaging your door frame or door. Also, make sure the door is propped open or secured in a safe manner so that it won't close between steps.
If you don't wish to do it yourself, a professional locksmith is a great option. They can provide expert advice, perfect execution and peace of mind. They can also help you select a safe and secure locking system. DIY can be a good method to save money and learn new skills. All you need is patience and the right tools, like a Phillips screwdriver. Change your uPVC lock isn't as daunting as it seems.
Installing the new lock cylinder
If you are replacing the lock on your front door, it is essential to use the correct measurements and follow the steps to ensure that the new one is put in the right way. This will not only avoid any future problems, but also ensure your home is more secure and permit you to use keys from both sides of the front door. Before you replace your uPVC lock, it is important to take measurements of the length overall as well as the backset and cylinder diameter. These measurements will ensure that the new lock cylinder is able to fit within the uPVC frame and functions correctly without any gaps or compromises in security.
The first step in the process is to remove the door handle by loosening the screws holding it with the screwdriver. Next, you need to locate the barrel screw that holds the cylinder lock in place and remove it. You can then remove the lock that was previously in place by inserting the key into the cylinder and turning it both left and right. If the key is in one of these positions, you should be able to remove the cylinder by wriggling it out of its slot.
Installing the new cylinder inside the front door is easy and will require the same steps as you used to remove the old one. But, it is important to note that the cylinder won't fit in the same space that the old one was. This is because the cylinder must be properly aligned so that it can be locked and closed with a key. To do this, you should make sure that the cylinder has a circular keyway and is aligned in its slot.
It is not difficult to install the latest uPVC door lock, but you should be careful not harm the door's frames or handles. If you are unsure about your ability to finish this project, hire an expert who is Checkatrade approved and has experience working with these kinds of doors. A locksmith can help you save money and time by completing the work quickly.
Attaching the door handle
There are several reasons you might want to upgrade the lock on your front door. You might have lost your key, your previous tenant hasn't returned your keys or you'd like to upgrade to more secure locks. The barrel of the lock on a uPVC door is a straightforward task that can be completed in about five minutes. You will need a Phillips-head screwdriver, the new cylinder of the lock and a spare key (if you plan to make use of one). Make sure the door is opened or secured securely so that it doesn't close during the process.
It is not as difficult as you imagine to replace the lock mechanism on the uPVC door. It is important to begin by determining the type of lock you have installed on your front door and what size you need for the replacement. Most modern uPVC doors have single euro-cylinder locks, however there are multipoint locks and strip locks available for older doors. Once you know the brand and type of lock that is on your uPVC front door, it's much simpler to find a like-for-like replacement.
After replacing the cylinder you will need to connect the handle. To begin, you'll have to loosen a set screw on the spindle shaft of the handle with the help of a screwdriver. Then, take off the handle to reveal the spindle shaft. If the shaft is threaded, you'll need to loosen it a bit before reversing it using a screwdriver to ensure a proper fit.
After you've tightened the screws on the new handle and the lock cylinder, it's time to test the lock. Verify that the key is turning easily and fits properly and that the locking mechanism of the handle is functioning correctly. Locksmiths can assist you if you're uncomfortable making it your own.
It's also worth remembering that uPVC door handles and lock mechanisms require regular lubrication to ensure their functionality. This is particularly true in areas that experience excessive wear and tear, such as those which are often used, or shut and locked. By adding a small amount of lubricant will go a long way towards extending their lifespan and ensuring they function correctly.
Test the new lock
A door lock made of pvc is an essential element of your home's security. Like replace lock on upvc door is possible for a uPVC lock to be damaged or worn out in time. Regular maintenance is crucial to a functioning uPVC locking system. This will prevent malfunctions from occurring and can compromise your home's security. The best way to achieve this is to grease the internal mechanisms with an approved oil every six months. This will stop the lock from rusting and causing damage.
Aside from the regular fluid, you could also use a silicon-based spray to loosen the keyway and make it easier to insert the key. This is an easy DIY fix that can save you money in the long term. You should avoid using WD-40 since it can leave a greasy residue that can damage the lock.
It is important to test the new cylinder after installation before you assume it will work correctly. This can be done by testing the handle from both inside and outside of the door. Then, put the handles back into place and then re-insert the spindle screws to confirm that everything is in order. Finally, re-insert the screws that secured them and pat yourself on the back for a job well-done!
If you're trying to increase your home's security, a locksmith can install additional features, including door chains or sash locks. They can assist you in selecting the best locks for your home. A professional can also assist you in choosing the best lock cylinder size for your doors. This is important because a mismatched lock could compromise your security.
The cost of replacing a uPVC lock can vary depending on the type of lock used and the number of doors that have to be replaced. The typical cost for a professional locksmith is between PS75 and PS100 per hour. However, this cost will vary based on where you live and what type of lock you need. It is also important to compare locksmith costs before choosing a locksmith.